The state Department of Environmental Conservation this morning announced the third confirmed location of didymo, a.k.a rock snot, an invasive algae, in New York. The unwanted algae was discovered in the Esopus Creek in Ulster County.

Unlike many other aquatic invasive plants, didymo (Didymosphenia geminata) grows on the bottom of both flowing and still waters. It is characterized by the development of thick, gooey mat-like growths – which can last for months – even in fast flowing streams. In addition to making footing difficult, didymo can impede fishing by limiting the abundance of bottom dwelling organisms that trout and other species of fish feed on.

“The presence of didymo in another popular New York waterway highlights the crucial need for people to be diligent in preventing the spread of invasive species,” DEC Commissioner Pete Grannis said. “Invasives can have a devastating impact not only on the environment but also the economy. I urge all outdoor enthusiasts to help out by adopting the ‘Check, Clean and Dry’ method for limiting the accidental transport of didymo and other invasive species from infected waterways to other water bodies.”

Previously on TNOT: More on rock snot and other invasives.

After the break, find tips on how to prevent the spread of this stuff.

From the DEC:

Check—Before leaving a river, stream or pond, remove all obvious traces of algae and look for hidden clumps and leave them at the affected site. If any is found later, it should be disposed of in trash receptacles, not washed down drains.

Clean—Treatment varies. The solution needs to completely penetrate thick, absorbent items such as felt-soled waders and wading boots.

For non-absorbent items, try these methods:
—Detergent or salt: Soak or spray all surfaces for at least one minute in a 5% solution (by volume) of dishwashing detergent or salt (7 ounces of detergent or salt added to a gallon of water).
—Bleach: Soak or spray all surfaces for at least one minute in a 2% solution (by volume) of household bleach (3 ounces of bleach per gallon of water).
—Hot water: Soak for at least one minute in very hot water (140 degrees F – hotter than most tap water) or for at least 20 minutes in water kept at 115 degrees F (uncomfortable to touch).

For absorbent items, longer soaking times are required. Use these methods:
—Hot water: Soak for at least 40 minutes in water kept above 115 degrees F.
—Hot water plus detergent: Soak for 30 minutes in hot water kept above 115 degrees F, containing 5% dishwashing detergent.

Dry – If cleaning is not practical, after the item is completely dry to the touch, wait an additional 48 hours before contact or use in any new waterway. Check thick, absorbent items closely to assure that they are dry throughout. Equipment and gear can also be placed in a freezer until all moisture is frozen solid.

NOTE: If cleaning, drying or freezing is not practical, restrict equipment use to a single water body. DEC encourages anglers to consider alternatives to felt-soled waders such as rubber studded boots.

ALSO, it is especially important that any gear used out of state be treated before use in New York waters.